PU30E-ZTS casting machine can make pu component and chromogen mixed completely to realize the most fashion able effect that you desire. In addition to the simple operation technology, the cost can also be reduced, the process of color adding or preparing is very simple, with more new effects created, for exam, sandals, slippers, shoe pads, labor insurance shoes, and upper joint shoes etc. PU30E-ZTS casting machine has been widely used for color adding system on PU soles, and has filled the domestic blank in this field.
PU30E-ZTS can cast double density PU foam soles simultaneously and can also cast any single color prepared color PU foam soles of double density simultaneously.
PU30E-ZTS can be equipped with the following peripheral equipment:
Mixer head lifting gear
Concentrate auto feeding unit
Concentrate tank can be custom-made 80L-350L
Circular production line, number of work station 50-108, also can be custom-made
·Structure
PU sole molded machine mainly consists of electric control system, mixing head, concentrate feeding tank, additive feeding tank, concentrate meter pump unit, feeding temp, rotary speed, pressure control system, cleaning system, air-let system and rack, etc.
·Characteristics
1. The mixer head is used rotary valve unit with anti-abrasion, high-precision, also with synchronous feeding, long service life, it is easy to handle, meanwhile, safe and reliable, convenient to maintain.
2. The control system is used the PLC PC control, with temp, pressure and rotary speed shown on the touch screen, visual and simple, also there is no overhead and overpressure protection device.
3. Applied the high-precision low-speed meter pump, with rotary speed controlled by the frequency converter and the PLC control pump motor, accurate to meter; meter error-1%;
4. Used the screw & blade combined device, with stirring speed n-7600 r/min, to ensure the feed liquid evenly stirred and discharged smoothly, also with the high precision and a good elasticity.
5. Used the cooling device, it has a long continuous service time, which can reduce the cleaning times of mixing head, reduce pollution, reduce coat and develop the quality.
6. The additive / matching system can be used the reliable servo variable for additive, simple to adjust, stable to run and convenient to operate.
7. The concentrate tank Is applied the feeding tank with anti-add SS (liner) with heating Inter-layer, where there Is a tubular electric heater attached Inside, also there Is a dry measuring cup set inside the feeding tank to ensure a stable quality and temp.
